Skip to main content

Wireless Key Push Button & KP Receiver

Pairing the KP Receiver to the wireless push button

  1. Press P1 on the receiver board (red LED will go solid)
  2. Press and hold the push button for 3 seconds (red LED will flash to say push button and receiver are paired)

Deleting KP recevier memory

  1. Press P2 on the receiver board for 8 seconds (red LED will go solid, push button and receiver are now unpaired)

Unit Attaching Points

We recommend attaching the push button via the attaching points as indicated with a red arrow shown in the image.

When you attach the push button unit to your post, even though the button housing is a sealed unit, we highly recommend sealing (silcone) all the way around the back housing to prevent any water or insects entering in through your screws.

We recommend every 6-12 months to do a thorough check over the push button and it’s internals to make sure there is no insect infestation and that everything is still in good working order.

Please be aware that failure to perform the recommendations above will void your warranty.

How to pair a wireless button to the KP Receiver

Wiring Diagrams

E8 - EGA Swing
Control Board

TMT 400LLS - Swing
Control Board

DACE Ultima
Control Board

TMT 800LS
Control Board

DC400
Control Board

E8 - D1 Swing
(discontinued)
Control Board

DACE Sprint/Condo
(discontinued)
Control Board

AC LW550
(discontinued)
Control Board