TMT 800LS 24V
Sliding Gate Motor

TMT 800LS

The TMT 800LS sliding gate opener has a die cast aluminium base that provides durability while being light. The motor holds a low profile that can discretely blend in with the rest of your yard

How to install a sliding gate

Quick Setup Guide for the TMT 800LS

KIT INCLUSIONS

TMT 800LS Kit

SALE ON NOW! 10% OFF

~~$770~~ $693

BUY NOW

Motor with Base Plate
2 x Release Keys
4mtrs Nylon Racking
2 x Remotes (with free holders)
1 x 24Volt Outdoor Transformer
(low voltage cable & connector not supplied)
Backup battery optional (not included)

Motor

Racking

2 year warranty

Remotes

Transformer

Kit Inclusions

A fully featured kit ready for do-it-yourself installation

TMT 800LS Heavy Duty Sliding Gate Motor

The TMT 800LS is a heavy duty sliding gate opener suitable for both residential and semi commercial gates up to 800kgs.

Designed for the tough Aussie conditions with soft start/finish and fast travel speed. This Low voltage 24 volt system allows the DIY installer to position the Plug-in step-down transformer (240 volt to 24 volt) up to 30mtrs away from the opener using 2 core cable (not included)...much like installing 12 volt garden lighting....quick and easy.

TMT 800LS - Features & Specifications

Swift: specially designed gear ratio for class leading operation speeds of 16mtr/min
Durable: Multi-layered coating that provides holistic protection against atmospheric agents and UV radiation
Light: Die cast aluminum base that balances performance with durability, offering best in weight to performance ratio

Delicate: Optional deceleration at closing for a soft touch
Sensitive: Obstacle detection to ensure that accidental entrapments do not cause harm to your property or loved ones
Adjustable: Over 20 customizable settings from gate operation speed, limit locations, soft closing and more

User-Friendly: Alphanumeric LED on control board for status indication and settings
Safe: Built in limit switches to ensure safe operation

Features

MANUAL OVERRIDE

When power has failed or you need to manually slide the gate open.

Insert Key

Turn key clockwise to unlock device

Pull the release bar open and slide gate

MOTOR OVERVIEW

MOTOR BASE PLATE

A = 315mm
B = 180mm
C = 260mm
D = 115mm
E = 60mm
F = 80mm
G = 40 x 35
H = 50 x 50

A = Conduit holes
B = Base plate mounting holes
C = Motor mounting holes

SPECIFICATIONS

Battery Backup	Yes (optional)
Max. Run Speed	16mtrs/min
Max. Gate Mass	800kgs - level ground
Max. Gate Size	8mtrs
Gear Type	Worm Gear
External Pinion Gear	Steel
Internal Drive Gear	Polyoxymethylene